Norwalk Juicer Model 275

Listing my Norwalk model 275 juicer that I’ve made a few improvements to. 1. The round rubber drive belt is replaced with a reinforced V-belt (similar to the kind of construction used for automotive drive belts, much stronger and won't stretch). The factory round belt stretches, lowering pressure and juice yield up to 15%. The V-belt maintains pressure indefinitely maintaining maximum juice yields. 2. Upper press surface located at the top of the juicer on the right (what the hydraulic ram presses against to extract the juice): Replaced the inner block with a solid block of white oak with radiused corners so that it completely fills and reinforces the entire outer surface of the upper press area so it can never collapse, or leak and results in maximum juice yield. 3. Replaced the factory hydraulic ram return spring with a lifetime premium chromium return spring. It's much stronger than the Norwalk factory return spring and will not take a "set". The lifetime premium lifetime chromium return spring alone is $95.00 plus tax and shipping. 4. Installed taller feet which allows 16 oz. canning jar/glass to fit underneath the juice spout. Much less mess and wasted juice! 5. Completely sealed every seam where juice can leak inside. This juicer is perfectly clean and sanitary inside and out. 6. Freshly sharpened cutter by Norwalk at their factory. 7. All hydraulic pump seals replaced with Norwalk parts and hydraulic fluid is fresh with premium synthetic hydraulic fluid. I have the manual, new cloths, new synthetic pusher (more sanitary than the original wood pusher) all the screens and accessories and also the Norwalk splash lid that prevents up-splash from the feed tray when feeding carrots, etc. I can arrange delivery, within reason. Wishing you and yours the very best of health!