3 Custom Hay Tank Feeders made from Round 3 piece Feeder

This is for 3 Custom Made Hay Feeders. Great for saving hay, and keeping it dry. One of them (the first 5 photos) has a custom back door to be able to feed from outside the fenceline and put the hay in from the back. It also has a divider and can feed two horses side-by-side (we had to remove the top part of the divider to move this feeder). The other two have a solid sheet of wood on the back and tarps over them and we usually just threw bales of hay in from the front. We also put them overtop of the big round bales when the round bales are on edge. We would take the wood off the back of the two without the drop down door on the back, and slide them over the round bale. The tarps could probably stand to be replaced, or another put over top. The metal ring has some rust but still sturdy. They are made from a round 3 piece S bar hay feeder (original cost over $450 for the 3 piece ring feeder alone) disassembled and set on edge with tarps overtop, wood in the front and back and water pipe across the front so the horse can't walk on the hay and it stays dry inside the feeders. They Really save on wasted hay!! The last photo is a stock picture of the type of feeder we took apart to make these out of. It's for reference only. These could be disassembled and turned back into a round feeder. Nuts and bolts would be needed to reassemble it and hold the 3 pieces together. They are not included. These worked great for us and saved a lot of money on wasted hay! From the ground on one side to the ground on the other side over the arch measures 16' and from the ground straight up to the highest point in the arch is 6' tall. (See 4th photo).